Skip to content
All Aqua Pools

Gunite Pools

Gunite Pools in Volusia County.

A gunite shell is formed in place, on your property, to a plan drawn for that property. That is what gives the design its range.

Concrete pool shell being worked on before finishing

Construction

How a Gunite Shell Is Formed

Gunite is a mix of cement and sand applied at pressure over a steel reinforcing cage, so it takes the form of the frame beneath it.

A gunite build generally runs in this order.

Layout and excavation. The shape is marked on the ground and the hole is dug to it. This is where a design meets the soil, grade and setbacks of a particular property.

Steel and plumbing. A reinforcing cage is tied inside the excavation and the plumbing runs are set before the shell is applied, because what is behind the shell stays behind it.

The gunite application. The mix is applied over the steel and shaped. Benches, steps, tanning ledges, swim-outs and spa walls can be formed at this stage.

Curing. The shell cures before finishing work begins.

Tile, coping and interior finish. Waterline tile, the coping around the edge and the interior surface follow the cured shell.

Decking, equipment and startup. The deck, the equipment set and the water chemistry bring the pool into service.

Custom pool with steps, a tanning ledge and a raised spa

Design

Design Options for a Gunite Pool

Shape. Freeform, geometric, Roman end, lagoon, or a shape drawn around the constraints of a particular yard. Because the form is built on site, the shape is set by the design and the site conditions. The range we build is on our pool types, from geometric to freeform to lagoon.

Features formed in the shell. Tanning ledges, benches, swim-up seating, raised spas with spillways, beach entries and sun shelves can be formed as part of the structure. Our pool and spa combinations page shows how that looks when a spa is part of the same shell.

Depth and profile. A pool intended for lap swimming and a pool intended for a family with small children are different shapes underwater. Depth and profile are design decisions that depend on the site, the intended use and the applicable requirements.

Custom tile. Covered below.

Tiled raised spa wall with a spillover into the pool

Tile

Custom Tile

Tile is one of the most visible decisions on a gunite pool, and there is more scope in it than people expect.

Waterline tile runs the band at the water’s edge. It is the most visible tile on the pool and it sets the tone of the surface.

Interior tile can carry across the whole shell rather than stopping at the waterline. Materials vary in how they read in Florida light and in what they suit, so the selection is made against the specific design and application.

Spa and feature surfaces, including raised spa walls, spillways, steps and risers, sun shelves and water-feature faces, can be tiled as part of the design.

Mosaics and inlays can be set into the floor or on the steps.

Because the shell is formed on site, the tile layout is planned against the actual dimensions of your pool. Bring your tile ideas to the design conversation and ask what suits the application.

Remodeled pool with lit water features

Remodels

Gunite for Remodels

An existing gunite pool can often be refinished, retiled, or reworked rather than replaced, and features can sometimes be added to a shell already in the ground. What is possible on any particular pool depends on an assessment of the existing structure and the proposed design.

Ocean-front pool and patio at dusk

Volusia County

Building in Volusia County

Every build answers to the conditions of its site: the water table, the soil, the setbacks on the lot, and the approvals the work requires. Those are site questions, which is why a gunite project starts with a conversation about the specific property rather than a figure from a plan.

Our service areas include pages such as Port Orange, and the finished work is in our project gallery.

Waterfront pool and lounge area at dusk

Next steps

What to Ask When You Get in Touch

These are the questions worth settling early on a gunite project.

  • What shape, depth and profile suit the yard and how you intend to use the pool?
  • Which features should be formed into the shell rather than added later?
  • What tile direction fits the design, and where should it go?
  • Which approvals does the project need, and who will handle them?
  • What does the sequence of work look like for this particular site?

Contact All Aqua to discuss your property, pool design and next steps. Get in touch.

Your pool, done right

You’ve Imagined It. Now Build it.

Tell us about your home, vision, and goal. We’ll help you bring your backyard vision to life.

Book your design consultation